Quantcast
Channel: CodeSection,代码区,网络安全 - CodeSec
Viewing all articles
Browse latest Browse all 12749

stealth/opmsg: A gpg alternative

0
0
opmsg
stealth/opmsg: A gpg alternative
A gpg alternative

opmsg is a replacement for gpg which can encrypt/sign/verify your mails or create/verify detached signatures of local files. Even though the opmsg output looks similar, the concept is entirely different.

Features:

Perfect Forward Secrecy (PFS) by means of ECDH or DH Kex native EC or RSA fallback if no (EC)DH keys left fully compliant to existing SMTP/IMAP/POP etc. standards; no need to touch any mail daemon/client/agent code signing messages is mandatory OTR-like deniable signatures if demanded easy creation and throw-away of ids support for 1:1 key bindings to auto-select source key per destination adds the possibility to (re-)route messages different from mail address to defeat meta data collection configurable, well-established hash and crypto algorithms and key lengths (RSA, DH, ECC, AES, Chacha) straight forward and open key storage, basically also managable via cat , shred -u and ls on the cmdline seamless mutt integration Key format suitable for easy use with QR-codes optional cross-domain ECDH Kex

opmsg builds fine with any of the OpenSSL, LibreSSL and BoringSSL libcrypto libraries. Building against BoringSSL is not recommended due to missing blowfish and ripemd algorithms.

You can use various transports with opmsg such as Mail or drops .

Build

opmsg requires the crypto primitives from OpenSSL . Just relax, its not using the SSL/TLS proto, just the ciphering and hash algorithms. For standard linux distros, just type make .

The compilation requires a C++ compiler that supports -std=c++11 . This can be configured with e.g. make CXX=eg++ LD=eg++ on OpenBSD .

This project supports both BN_GENCB_new and BN_GENCB for big number generation. To disable BN_GENCB_new , set HAVE_BN_GENCB_NEW to false: make DEFS=-DHAVE_BN_GENCB_NEW=0 . So on OpenBSD , you would run make CXX=eg++ LD=eg++ DEFS=-DHAVE_BN_GENCB_NEW=0 . On OSX you should install your own OpenSSL , as Apple marks OpenSSL as deprecated in favor of their own crypto libs. You may also set all these options in the Makefile .

It successfully builds on Linux , OSX , OpenBSD and probably a lot of others ( Solaris , FreeBSD ,...).

$ make [...] $ cp opmsg /usr/local/bin/ $ mkdir ~/.opmsg && touch ~/.opmsg/config $ opmsg opmsg: version=1.69 -- (C) 2016 opmsg-team: https://github.com/stealth/opmsg Usage: opmsg [--confdir dir] [--native] [--encrypt dst-ID] [--decrypt] [--sign] [--verify file] <--persona ID> [--import] [--list] [--listpgp] [--short] [--long] [--split] [--new(ec)p] [--newdhp] [--calgo name] [--phash name [--name name] [--in infile] [--out outfile] [--link target id] [--deniable] [--burn] --confdir, -c (must come first) defaults to ~/.opmsg --native, -R EC/RSA override (dont use existing (EC)DH keys) --encrypt, -E recipients persona hex id (-i to -o, needs -P) --decrypt, -D decrypt --in to --out --sign, -S create detached signature file from -i via -P --verify, -V vrfy hash contained in detached file against -i --persona, -P your persona hex id as used for signing --import, -I import new persona from --in --list, -l list all personas --listpgp, -L list personas in PGP format (for mutt etc.) --short short view of hex ids --long long view of hex ids --split split view of hex ids --newp, -N create new RSA persona (should add --name) --newecp create new EC persona (should add --name) --deniable when create/import personas, do it deniable --link link (your) --persona as default src to this target id --newdhp create new DHparams for persona (rarely needed) --calgo, -C use this algo for encryption --phash, -p use this hash algo for hashing personas --in, -i input file (stdin) --out, -o output file (stdout) --name, -n use this name for newly created personas --burn (!dangerous!) burn private (EC)DH key after decryption to achieve 'full' PFS

If you want to use additional features, such as from opmux (opmsg/gpg auto forward) or opcoin (using bitcoin network as a web-of-trust), also type make contrib . Contrib tools are documented in README2.md.

Personas

The key concept of opmsg is the use of personas. Personas are an identity with either an EC or RSA key bound to it. Communication happens between two personas (which could be the same) which are uniquely identified by the hashsum of their EC/RSA keys:

$ opmsg --newp --name stealth opmsg: version=1.2 -- (C) 2015 opmsg-team: https://github.com/stealth/opmsg opmsg: creating new persona .......[...].........................o..o..o..o..o..oO opmsg: Successfully generated persona (RSA + DHparams) with id opmsg: 1cb7992f96663853 1d33e59e83cd0542 95fb8016e5d9e35f b409630694571aba opmsg: Tell your remote peer to add the following RSA pubkey like this: opmsg: opmsg --import --phash sha256 --name stealth -----BEGIN PUBLIC KEY----- MIGfMA0GCSqGSIb3DQEBAQUAA4GNADCBiQKBgQC4Xds/bPlkdqA9VhDBOIEV/Dc9 4EfL5aPBOQAdTIaZKE69SJdwakFhqOY1PeaeGRDcGTVNLBQ1Udgbc2YCgQh1X5Dn veRIGJoGfqWC7zeq/mx6yRer3PTUOA0gr30Uu7IO128fVDxNLYYUuvzhzcdysZAa WkmRflKuaCEMQ3RjcQIDAQAB -----END PUBLIC KEY----- opmsg: Check (by phone, otr, twitter, id-selfie etc.) that above id matches opmsg: the import message from your peer. opmsg: AFTER THAT, you can go ahead, safely exchanging op-messages. opmsg: SUCCESS.

This is pretty self-explaining. A new persona with name stealth is created. The public RSA key of this persona has to be imported by the remote peer that you want to opmsg-mail with via

opmsg --import --phash sha256 --name stealth

just as hinted above. After pasting the public key of your communication peer into above commandline - once it told you to do so - you will be given the persona ID, that consists of the hashsum (sha256 in this case) of the public key. ID's may be presented to you in --short , --long , or --split (default) form, and will be auto-detected in either form as you pass it to the command line.

opmsg does not rely on a web-of-trust which in fact never really worked. Rather, due to ubiquious messenging, its much simpler today to verify the hashsum of the persona via additional communication paths. E.g. if you send the pubkey via plain mail, use SMS and twitter to distribute the hash, or send a picture/selfie with the hash and something that uniquely identifies you. Using two additional communication paths, which are unrelated to the path that you sent the key along, you have a high degree of trust. Side-note: If you want to stay anonymous, do not send selfies with your persona id and dont use communication paths that can be mapped to you.

By default sha256 is used to hash the pubkey blob but you may also specify ripemd160 or sha512 . Whichever you choose, its important that your peer knows about it during import, because you will be referenced with this hex hash value (your persona ID) in future.

The private part of the keys which are stored inside ~/.opmsg are NOT encrypted. It is believed that once someone gained access to your account, its all lost anyway (except for PFS as explained later), so a passpharse just add a wrong feeling of security here. Keep your account/box unpwned! Otherwise end2end encryption makes little sense.

opmsg encourages users for easy persona creation and throwaway. The directory structure below ~/.opmsg is easy and straight forward. It just maps the hex ids of the personas and (EC)DH keys to directories and can in fact be edited by hand.

Creation of RSA personas might take some time. Not just an RSA key is generated in that case - which is not very time consuming - but also DH parameters (2048bit by default) that are used to implement PFS in later messenging (see later chapter).

In order to speed up persona generation and to encourage use- and throwaway and per-project personas, EC support was added to opmsg as of version=1.5 . Instead of --newp you would just use --newecp and everything else is the same. opmsg will pick the right crypto transparently to you. No need to add any further switches for encryption or alike. EC personas use the brainpool curves (RFC 5639). The NIST curve secp521r1 may also be used as a fallback if your libcrypto is outdated, but its recommended to use the brainpool curves which dont keep any secrets about how their group parameters were selected. Also see the chapter about cross-domain ECDH down below.

Persona linking

Although this step is not strictly necessary, it is recommended . As personas are easily created, you can (should) create a dedicated persona for each of your "projects" or contacts. That is, if you have 7 communication partners/peers, you should have created 7 personas; one EC/RSA key for each of them. To handle that easily with your mailer (see later for MUA integration), you should add a proper --name , describing your id. If you are using email addresses along with names, use the format of --name 'da name <name@address>' so that your MUA can easily pick a list of candidates for you.

Additionally, you should --link your source persona (each of the 7 you created) to the particular destination persona that you wish to communicate with using this source id:

$ opmsg --link b3c32d47dc8b58a6 --persona 1cb7992f96663853 opmsg: version=1.2 -- (C) 2015 opmsg-team: https://github.com/stealth/opmsg opmsg: linking personas opmsg: SUCCESS.

This is to avoid the need to specify --persona each time you send a message to a different target persona, changing your local id back and forth inside the config file or at the command line. Above command says, that each time you send an opmsg to b3c32d47dc8b58a6 , the keying material from your local id 1cb7992f96663853 is used. To unlink your id from b3c32d47dc8b58a6 , remove the srclink file inside this personas directory.

If no link is found for a persona, the config file and given --persona argument is evaluated. Command line arguments override the config file settings.

Given proper mail provider support (e.g. inboxes are created on the fly for addresses like hexid@example.com ), the global surveillance meta graph would just contain pairs of communication partners. No clusters, just islands of 1:1 mappings.

Deniable personas

There may be valid scenarios where you dont want your communication peer to have a way to proof that you wrote a certain message. Since op messages are always signed with your persona key, peer could proof that you were expressing illegal thoughts. So you want deniable messages that are sill integrity protected. The OTR protocol is handling this by sharing the public as well as the private key for a dedicated communication session between both peers.

opmsg allows to do the same. It requires an additional communication step with a peer that you already imported once and which you suspect to do such back stabbing. (Generally speaking its wise to assume that case.)

It is recommended to use EC personas for that purpose, as its faster. Just add --deniable switch on the commandline when creating or importing this deniable persona as well as a --name that reflects deniability for you. This will print or import the private key half of the persona and link it to itself.

As this new persona is linked to itself, whenever you send something to the peer the signing key is shared with that peer. You can always deny that you sent this message as your peer could also have signed it ( src-id and dst-id inside the message are the same). Only exchange deniable persona keys across an existing secure (encrypted) channel as it contains private keying material. Do not share any key material of this dedicated new EC persona to anyone else. Its only for this dedicated, deniable, communication peer.

Once a deniable peer is established, you may use it as often and as long as you wish and as within normal operation. Deniable op messages are integrity protected and feature all crypto benefits.

Of course for this to work you also want to have fully encrypted your disk to leave no forensic artifacts and dont want to cite your peer in reply-messages as this proofs that you were able to decrypt a mail from your peer, e.g. you are hold of a certain private session key ( kex-id ). Thats a common mistake people make who dont sign their emails and think everything is deniable.

Keys

Now for the coolest feature of opmsg : Perfect Forward Secrecy (PFS).

Without any need to re-code your mail clients or add bloat to the SMTP protocol, opmsg supports PFS by means of (EC)DH Kex out of the box.

For RSA personas, DH Kex is used. For EC personas ECDH Kex is used to derive the secret, hence the term (EC)DH.

As op-messages are always signed by its source persona, whenever you send an opmsg to some other persona, a couple of (EC)DH keys are generated and attached to the message. The remote opmsg will verify its integrity (as it has this persona imported) and add it to this persona's keystore. So whenever this remote peer sends you a mail next time, it can choose one of the (EC)DH keys it has got beforehand. If your peer runs out of (EC)DH keys, opmsg falls back to native RSA or EC encryption, depending of the type of persona. The peer deletes used (EC)DH pubkeys to not use them twice and the local peer marks used keys with a used file within the apropriate key-directory. Once again, sha256 is used by default to index and to (worldwide) uniquely identify (EC)DH keys.

Attention:If you keep encrypted op-messages in your mailbox, do not throw away this persona. You wont be able to decrypt these mails afterwards! Throwing away a persona also means to throw away all keying material. Thats why opmsg has no switch to erase personas. You have to do it by hand, by rm-ing the subdirectory of your choice. Thats easily done, but keep in mind that any dangling op-messages in your inbox will become unreadable, as all keys will be lost. If you want to benefit from PFS, you have to archive the decrypted messages and throw away used keys. After all opmsg is not a crypto container or a replacement for FDE (which is recommended anyway). opmsg is about to protect your messages in transit, not on disk.

As of version=1.3 there is a --burn option that nukes used DH keys from storage. Be aware: you can only decrypt the message once. Once the message is successfully decrypted, the (EC)DH key that was used is overwritten and deleted from storage.

cross-domain ECDH

You may skip this section if you are not really paranoid about potentially backdoored EC curves and how to cope with it.

There is a (yet experimental) feature, which may be enabled by using protocol version 3 and specifying more than one EC curve in the config:

... version=3 ... curve=brainpoolP384r1 curve=secp256k1 ...

Up to three different curves may be specified. For each curve specified, a dedicated ECDH handshake is made. That is, the key used for encrypting the message is derived from more than one ECDH Kex. The 'common' ECDH handshake, as seen in all other protocols like TLS etc., uses one curve. opmsg by default also uses one curve. But you can use more than one, and here is why: There is an endless discussion about which curve can be trusted. Some prefer the NIST curves, some prefer Brainpool and some prefer even other curves. As shown in various papers, it is possible by evil EC-curve designers to choose the curve domain parameters in a way that places backdoors into the curve. That is, by knowing certain seeding parameters, it is possible to create legit looking curves which fullfil all requirements, yet producing weak secrets, if the attacker knows the evil seeding bits. It is not just a theroretical issue that evil committee members place backdoors into standards (take the dual-EC-DRBG as a warning).

The idea behind cross-domain ECDH is that, even if we assume all EC curves to contain backdoored parameters, the knowledge about it is so well protected that it is not shared across each other. Would the NIST share their backdoor seedings with the russians or vice versa? Certainly they wouldn't. In other words, each backdooring party would keep their evil seeding for themselfs. By using cross-domain ECDH, we exploit this fact and can negotiate a strong secret, even with potentially backdoored EC curves.

This is for the negotiated session keys. The persona keys (used for signing) are still generated using a single curve. But you may use cross-doamin ECDH with RSA personas now, by specifying

... ecdh-rsa ...

in the config.

MUA integration

First, add to your ~/.gnupg/options file the following line:

keyid-format long

Next, there are two possible ways to integrate opmsg into your MUA. For cool MUAs like mutt , you may build a dedicated .muttrc by adding:

# Add a header so to easy pick opmsg via procmail rules my_hdr X-opmsg: version1 set pgp_long_ids # use this listing mode if the 'name' aliases are a substring of the email address # to avoid huge listings set pgp_list_pubring_command="/usr/local/bin/opmsg --listpgp --short --name %r" # otherwise, skip the --name option to list all personas #set pgp_list_pubring_command="/usr/local/bin/opmsg --listpgp --short" set pgp_encrypt_sign_command="/usr/local/bin/opmsg --encrypt '%r' -i %f" set pgp_encrypt_only_command="/usr/local/bin/opmsg --encrypt '%r' -i %f" set pgp_decrypt_command="/usr/local/bin/opmsg --decrypt -i %f" set pgp_verify_command="/usr/local/bin/opmsg --decrypt -i %f" # or set to "^opmsg: SUCCESS\.$" - only required for newer mutt versions #unset pgp_decryption_okay

and work with your mails as you would it with PGP/GPG before. If you use a mix of GPG and opmsg peers, its probably wise to create a dedicated .muttrc file for opmsg and route opmsg mails to a different inbox, so you can easily work with GPG and opmsg in parallel. But theres also another option: Using opmux :

set pgp_long_ids # OPMUX_MUA env setting is optional and only required if you use 'pgp_decryption_okay' in newer mutts set pgp_decode_command="OPMUX_MUA=mutt /usr/local/bin/opmux --passphrase-fd 0 --quiet --batch --output - %f" set pgp_verify_command="OPMUX_MUA=mutt /usr/local/bin/opmux --quiet --batch --output - --verify %s %f" set pgp_decrypt_command="OPMUX_MUA=mutt /usr/local/bin/opmux --passphrase-fd 0 --quiet --batch --output - %f" set pgp_encrypt_only_command="/usr/local/bin/opmux --batch --quiet --output - --encrypt \ --textmode --armor --always-trust -r '%r' %f" set pgp_encrypt_sign_command="/usr/local/bin/opmux --passphrase-fd 0 --batch --quiet --textmode \ --output - --encrypt --sign %?a?-u %a? --armor --always-trust -r '%r' %f" set pgp_list_pubring_command="/usr/local/bin/opmux --batch --quiet --with-colons --list-keys %r" # Be sure to not override it later on. This regex may also be unset. set pgp_decryption_okay="^opmux: SUCCESS\.$"

opmux is a wrapper for opmsg and gpg , which transparently forwards encryption and decryption requests to the right program, by checking message markers and persona ids. This way you may use your opmsg and gpg setup in parallel and the correct (de)crypt program is automagically invoked. When you send a Mail and an opmsg persona is found for the destination, opmsg is used for encryption, otherwise gpg is used. This requires your personas to be properly --link ed or having a valid my_id in your opmsg config.

For enigmail or other MUAs you would just configure the gpg-path to be /path/to/opmux and you are done (but dont forget the keyid-format long from the first step).

opmux prefers the gpg2 over the gpg binary if both gpg versions are installed. If you have both gpg versions installed in parallel but for whatever reason want to work with your (old) gpg1 keys, you have to change the call order in opmux.c gpg() function.

All this however is just for convenience. The more GUI and layering you add to your opmsg setup, the more chance you have to use wrong destination or source personas. So be sure to thoroughly test your setup. Again, make sure your personas are properly linked and you have a clean default persona id assigned in the config.

Cc and Bcc

Since version=1.65 opmsg supports Cc/Bcc from mails, e.g. you may specify more than one -E persona recipient. However if you used to Cc messages to yourself for archiving, you must not use --burn because in fact you are referencing session keys that were initially generated for someone else. Then at times when this peer send you encrypted messages, you will miss that key.

Please note that in general using crypted mails and Cc is leaking privacy, as the destination personas see whats in your keystore and which key ids you are referencing. Its also asking for headache if you did not set up your keystore properly (linking personas and keeping the link ids up to date, removing dead personas etc.)

If you are operating, you may also consider a dedicated account (machine) with a dedicated opmsg setup so that you dont accidently sign operational messages with source personas that link to a publically known profile. Deniable messages wont help in that case.

Config file

You need to setp up your local ~/.opmsg/config to reflect the source persona you are using when sending your mail via mutt , unless you specify it via -P on the commandline or used --link : (linking personas is recommended, see above)

# opmsg sample config # 1 or 2. Default is 2. The KDF in version=2 is hardened against evil maid attacks. # Only use version=2 if you know your peer uses opmsg >= 1.60 that can handle version=2. # Your peer then automatically chooses right version. Theres no config change needed # for your peer. version=2 # Using the long format optimizes keystore loading, as an exact lookup takes place, # and searching the keystore is avoided. # Also see 'linking personas' in README. It is recommended to use different ID # for each communication peer. my_id = 50973f3cfc3e0f3f1a7d4047aa6fa7645510f3b4ddc486a4b72bcacdf3aad570 # default rsa_len = 4096 # default dh_plen = 2048 calgo = aes128ctr # the ID output format (default) idformat = split new_dh_keys = 3 # EC curve to be used for EC personas (prefered since its faster) # Default. Other choices: secp521r1 (be aware: NIST curve!), brainpoolP320t1, brainpoolP384r1, # brainpoolP384t1, brainpoolP512r1, brainpoolP512t1 curve = brainpoolP320r1 # Check on decrypt whether the sender (src-id) used a kex-id that was once sent to him # as a dst-id. # This allows you detect cross-references for people using different src personas to # to contact a single persona of yours. This way you can detect/enforce isolation. # By default its disabled. peer_isolation=1 Supported ciphers $ opmsg -C inv -D opmsg: version=1.64 -- (C) 2015 opmsg-team: https://github.com/stealth/opmsg opmsg: Invalid crypto algorithm. Valid crypto algorithms are: opmsg: aes128cbc (default) opmsg: aes128cfb opmsg: aes128ctr opmsg: aes128gcm opmsg: aes256cbc opmsg: aes256cfb opmsg: aes256ctr opmsg: aes256gcm opmsg: bfcbc opmsg: bfcfb opmsg: cast5cbc opmsg: cast5cfb opmsg: null opmsg: FAILED. Examples $ opmsg --list --short opmsg: version=1.2 -- (C) 2015 opmsg-team: https://github.com/stealth/opmsg opmsg: persona list: opmsg: Successfully loaded 1 personas. opmsg: (id) (name) (has-RSA-priv) (#DHkeys) opmsg: 1cb7992f96663853 stealth 1 0 opmsg: SUCCESS.

Creating a detached signature for a file:

$ echo foo>foo $ opmsg --sign -i foo --persona 1cb7992f96663853|tee -a foo.sign opmsg: version=1.2 -- (C) 2015 opmsg-team: https://github.com/stealth/opmsg opmsg: detached file-signing by persona 1cb7992f96663853 opmsg: SUCCESS. -----BEGIN OPMSG----- version=1 -----BEGIN SIGNATURE----- U822A12k1IZiWqRKAr6uLKT/7HGR4inKpkqzz49xLNjBf4mo91HUxcPMFGQTDB/MbE9HqtdCgHNexfIy GCC6Jb6egt2D70nIyhWfksW9KljdqwQzUbXp9CubxRAz5EqTS0n0ze092LuXxV4SuKV628CTBr5siIcf za6g3Sfh+vg= -----END SIGNATURE----- rythmz=sha256:sha256:sha256:null:DOauqyrqoH4zslO4gr3FFI7EMbcLtRzU src-id=1cb7992f966638531d33e59e83cd054295fb8016e5d9e35fb409630694571aba dst-id=1cb7992f966638531d33e59e83cd054295fb8016e5d9e35fb409630694571aba kex-id=00000000 -----BEGIN OPMSG DATA----- b5bb9d8014a0f9b1d61e21e796d78dccdf1352f23cd32812f4850b878ae4944c -----END OPMSG-----

Verifying it:

$ sha256sum foo b5bb9d8014a0f9b1d61e21e796d78dccdf1352f23cd32812f4850b878ae4944c foo $ opmsg -V foo -i foo.sign opmsg: version=1.2 -- (C) 2015 opmsg-team: https://github.com/stealth/opmsg opmsg: verifying detached file opmsg: GOOD signature and hash via persona 1cb7992f96663853 1d33e59e83cd0542 95fb8016e5d9e35f b409630694571aba opmsg: SUCCESS. $ opmsg -V foo -i foo.sign --short opmsg: version=1.2 -- (C) 2015 opmsg-team: https://github.com/stealth/opmsg opmsg: verifying detached file opmsg: GOOD signature and hash via persona 1cb7992f96663853 opmsg: SUCCESS. Meta data

If you care about meta data collection and want to reduce your data-tracks even further, check out drops . drops is a p2p transport network for opmsg . It allows you to anonymously drop end2end encrypted op-messages without leaking meta-data such as mail headers.


Viewing all articles
Browse latest Browse all 12749

Latest Images

Trending Articles





Latest Images